Epoxy Resin for DIY Tumbler Coatings
Use Amazing Clear Cast Epoxy Resin to coat, refinish or make brand new, custom tumbler coatings.
Amazing Clear Cast is an easy-to-use, do-it-yourself epoxy resin that can completely transform tumbler coatings.
Tumbler Coatings Videos
Coating Stainless Tumblers with Amazing Clear Cast Resin
Take your basic & boring stainless steel tumbler and give it some life by painting, applying vinyl decals, or decorative tapes! Personalize it for a friend, family member, or for a special event. Once decorated, Applying a coat of Alumilite Clear Cast Resin can give you a high gloss, durable, and FDA compliant coating, This video demonstrates the basic steps in coating your own project.
It is recommended to read all instructions and SDS prior to using Amazing Clear Cast and to test product to ensure suitability prior to application on main project.
Amazing Clear Cast
- Measure equal volumes of "A" & "B" sides
- Stir 3-5 minutes for adequate mixing
- **TIP** - stir slowly so less air bubbles form
- Work Time: 30-40 minutes
- Pour slowly into mold or onto surface
- Cure Time: 24-48 hours
Fixing bubbles in bar top coatings and encapsulations
Even with perfect planning and preparation, air bubbles can seem to appear from out of nowhere and get caught mid stream in your resin when casting items such as table or bar tops. This video shows the process for repairing air bubbles and making those blemishes barely noticeable. If coating has been curing beyond 12 hours, light abrasion may be needed across entire surface to ensure adhesion between layers of Amazing Clear Cast.
Refinishing Amazing Clear Cast Coatings
After years of use, especially for bar tops, the Amazing Clear Cast can be sanded and renewed in a few easy steps. This video demonstrates that you can take sand paper as low as 60 grit to quickly remove blemishes and pour a new coating of Amazing Clear Cast to revitalize the surface.
How to Mix Amazing Clear Cast Clear Resin - Alumilite
Mixing clear resins can be a challenge, as both sides are clear without pigment, unlike products that have color to determine adequate mixing. This video demonstrates a basic technique for mixing Amazing Clear Cast resin. It discusses how to properly measure and thoroughly mix the product to ensure full cure and great results.
- Measure 1:1 by Volume (do not go by weight)
- Thoroughly mix side A & B together (30 minutes open time)
- Wait five minutes for air bubbles to rise after stirring
- Pour into molds, surfaces and more!
- Full cure time is 24-48 hours
Amazing Clear Cast Resin by Alumilite
Alumilite's Amazing Clear Cast is a clear casting and coating system that cures to a rigid, durable, clear plastic. Use Amazing Clear Cast for coating or finishing applications such as bar tops, floors, taxidermy scenery, crafts/tumblers, lenses, pen blanks and all sorts of other clear casting or coating applications. Amazing Clear Cast is an easy to use, 1:1 mix ratio system that cures overnight which allows time for air bubbles to evacuate prior to curing. Amazing Clear Cast can be colored with Alumilite dyes, Alumilite Alumidust powders, alcoholic inks, or other non-water base colorants. Complies with FDA CFR 177.2600 for food contact
Tumbler Coatings FAQ
No, it is not necessary in all situations. If you are pouring over a surface that is not porous, sealing is not generally needed.
We recommend not pouring any thicker than 3/8-1/2 inch per pour.
Amazing Clear Cast cures slowly to allow air bubbles to rise to the surface and pop.
Amazing Clear Cast is a 100% solids and VOC-free epoxy. While it is a very safe product to use, it is important to read all directions, cautions, and SDS prior to use.
This is not an uncommon occurrence. Amazing Clear Cast has been formulated to provide a high gloss durable surface.
After the coating is fully cured, you can use a soft cloth with soapy water. To remove streaks and keep it glossy, you can use mild cleaners such as glass cleaner.
ACC has a shelf life of 1 year. Once ACC is opened, this time can be shorter based on moisture contamination from humidity.
Yes, as will all epoxy chemistry, ACC will yellow over time.
ACC will accept water-free dyes such as Alumilite liquid Dye. Based on the dye chosen, it can give you a translucent color or an opaque color.
We generally do not recommend ACC for outdoor applications, as the UV exposure will cause the resin to develop a yellow hue rather quickly .
Clear cast must be mixed using equal volumes of both A and B sides. Using graduated mixing containers helps to ensure that you accurately mix equal amounts.
Alumilite Corporation specializes in mold making and casting resins.
Open time at 75 degrees F is 45-60 minutes.
Demold time at 75 degrees F is 18-24 hours.
Full cure schedule is 72 hours.
1:1 mix ratio by volume of part A and part B.